archive-fr.com » FR » E » EBERSPAECHER.FR

Total: 318

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • Hydronic water heaters - Eberspächer
    passenger compartment but also the fresh water and to keep the windows clear as well Then you should decide for an Eberspächer Hydronic water heater The most important advantages summarised Pleasant cosy warmth in the passenger compartment Constant hot water for washing and showering More safety by clear windows and a clear view The engine reaches its operating temperature faster after starting Space saving installation under the floor thus more storage space Fuel supplied from the vehicle s own tank Low noise operation Low fuel consumption Integration in the vehicle s own water system Maintenance free easy to service Heating started by timer radio remote control or telephone How an Eberspächer water heater works This extremely compact system heats primarily the heating water system to provide a pleasant living room temperature A changeover valve provides even more comfort you get plenty of hot water enough even to take long showers When you drive off the engine heats up quickly and its optimum operating temperature is soon reached System accessories for individual complete solutions In addition to pre heaters Eberspächer offers a wide range of high quality optimally matched accessories In this way quite special requirements for use in motorhomes can

    Original URL path: http://www.eberspaecher.fr/en/fuel-operated-heaters/vehicle-selection/motor-home/hydronic-water-heaters.html (2013-12-11)
    Open archived version from archive


  • Coolers - Eberspächer
    Heaters Air Conditioning Press releases Press Eberspächer Group Download center We offer both a fixed range and a mobile range Fixed range Ebercool The coolers generate cool air and work by evaporating water Thus they are much less energy consuming than an air conditioner This way they can operate with the engine off Heavy vehicles available in the new version E12 Intelligent 12 or Optima models the Ebercool range guarantees the driver a proper rest which is a security pledge The Ebercool E12 model is only 13 5 cms high which makes it more aerodynamic more esthetic and easier to install on high cabins The range is broadened with X Trême a version fit for dusty workings type environments and Holiday II a motor home version with a tank supplied by the domestic water line and embedded in the roof unit to gain space onboard The Ebercool range is also distributed in the Benelux area under the name Viesa or Ebercool Mobile range Mobile Cooler Installation free they are environment friendly since they use water They ensure comfort and rest when the engine is stopped and can be moved from one place to another They operate on the 24 V

    Original URL path: http://www.eberspaecher.fr/en/fuel-operated-heaters/vehicle-selection/motor-home/coolers.html (2013-12-11)
    Open archived version from archive

  • High altitude pump - Eberspächer
    up to 1 500 m 4 900 ft They can operate off and on beyond this altitude to pass a mountain pass for instance but not for extended periods of time The air rarefaction indeed modifies the combustion equilibrium Lately it is possible to operate at altitudes beyond 1 500 m 4 900 ft by installing a 2nd pump preset for the altitude up to 2 500 m 8 200 ft in parallel The pump selection is made via a 2 position switch low high altitude This option is open in particular for the motor home and off road 4x4 applications If you choose a Hydronic 4 or 5 heater and you plan to drive in high altitudes it is preferable that you choose the WS versions rather than the WSC ones In fact the installation of the kit will be easier For the water heaters Hydronic D4WSC D5WSC and D5WS 12V a kit ref 240244000000 is available When ordering the pump indicate the usual reference and add preset for altitude For the D1LCC 12V and D3LCC 12V air heaters there is a kit ref 240221000000 For the D2 12V and D4 12V air heaters there is a kit ref

    Original URL path: http://www.eberspaecher.fr/en/fuel-operated-heaters/vehicle-selection/motor-home/high-altitude-pump.html (2013-12-11)
    Open archived version from archive

  • Night exhaust kit - Eberspächer
    heater quieter Part number 236 046 000 Night kit for Sprinter CDI with heater Hydronic as original equipment The original exhaust must be removed from those vehicles and replaced by the night kit It is constituted by the exhaust flexible 2 mufflers and the necessary accessories for fixing and linking It includes the burning air intake muffler part number 25 1688 89 03 00 that you can order separately if you already have the double exhaust muffler Part number 236 046 001 Night kit for Airtronic This kit completes the standard exhaust composed of only one muffler This extension includes the complement of exhaust flexible 1 complementary muffler and the necessary accessories for fixing and linking like the burning air intake muffler Part number 236 046 002 Night kit for Hydronic Same think as above but only for the Hydronic 4 and 5 heaters Part number 20 1634 800 600 To decrease the tick tick of the fuel pump that can be audible especially if it has been installed under the sleeper berth you can install a pump support with suspensions Take care that the fastening of the hoses in the vehicle is flexible to avoid the propagation of the

    Original URL path: http://www.eberspaecher.fr/en/fuel-operated-heaters/vehicle-selection/motor-home/night-exhaust-kit.html (2013-12-11)
    Open archived version from archive

  • High altitude pump - Eberspächer
    1 500 m 4 900 ft They can operate off and on beyond this altitude to pass a mountain pass for instance but not for extended periods of time The air rarefaction indeed modifies the combustion equilibrium Lately it is possible to operate at altitudes beyond 1 500 m 4 900 ft by installing a 2nd pump preset for the altitude up to 2 500 m 8 200 ft in parallel The pump selection is made via a 2 position switch low high altitude This option is open in particular for the motor home and off road 4x4 applications If you choose a Hydronic 4 or 5 heater and you plan to drive in high altitudes it is preferable that you choose the WS versions rather than the WSC ones In fact the installation of the kit will be easier For the water heaters Hydronic D4WSC D5WSC and D5WS 12V a kit ref 240244000000 is available When ordering the pump indicate the usual reference and add preset for altitude For the D1LCC 12V and D3LCC 12V air heaters there is a kit ref 240221000000 For the D2 12V and D4 12V air heaters there is a kit ref 240222000000 These

    Original URL path: http://www.eberspaecher.fr/en/fuel-operated-heaters/vehicle-selection/off-roader-and-suv/high-altitude-pump.html (2013-12-11)
    Open archived version from archive

  • Dr. Günter Baumann - Eberspächer
    the Technical University of Munich degree in 1964 he earned his doctorate in 1967 at the Technical University of Darmstadt He was then employed at DuPont de Nemours in Frankfurt until 1973 Involvement President of the IHK Chamber of Industry and Commerce for the Stuttgart region from 2001 to 2009 Vice President of the DIHK German Association of Chambers of Commerce and Industry from 2005 to 2009 Member of the

    Original URL path: http://www.eberspaecher.fr/en/eberspaecher-group/group-of-companies/advisory-board/dr-guenter-baumann.html (2013-12-11)
    Open archived version from archive

  • Heinrich Baumann - Eberspächer
    of Munich 1988 1993 He then worked as a management consultant for Ernst Young After completing a Masters in Business Administration MBA in Fontainebleau France 1998 he worked as a management consultant for McKinsey in Vienna Involvement Member of the Advisory Board of the VDA German Association of the Automotive Industry Member of the Board of Directors of LVI State Association for Industry in Baden Württemberg Member of the Presidium

    Original URL path: http://www.eberspaecher.fr/en/eberspaecher-group/group-of-companies/management/heinrich-baumann.html (2013-12-11)
    Open archived version from archive

  • Dr. Thomas Wünsche - Eberspächer
    After his Abitur high school graduation he studied metallurgy at Aachen University 1983 1989 From 1990 he worked as a scientist with Mannesmann Röhrenwerken in Huckingen and was awarded his doctorate in 1991 at the University of Leoben Austria He then worked in various positions at Muhr und Bender KG in Attendorn and from 1993 with MUBEA Inc in Florence USA From 1997 through 2005 he was CEO and President

    Original URL path: http://www.eberspaecher.fr/en/eberspaecher-group/group-of-companies/management/dr-thomas-wuensche.html (2013-12-11)
    Open archived version from archive